BIBLIOTEKA Builder Gel № 17 Milk LUSTER – Milky with Shimmer, 30 ml

Builder Gel № 17 Milk LUSTER – Milky with Silver Shimmer, 30 ml

BUILDER GEL № 17 Milk LUSTER — a milky shade with a delicate silver shimmer that creates a cool, elegant glow.

BUILDER GEL is a medium-consistency modeling gel with a subtle shimmer effect matching the shade tone. It is easy to control during application, self-levels, and creates a smooth surface without uneven areas, allowing “ready-to-wear” modeling with minimal filing.

Reflective particles gently enhance the color, creating a delicate inner glow.

Thanks to the balanced combination of strength and elasticity, the gel provides durability and comfortable wear.
Suitable for nail leveling, strengthening, and extensions.

Advantages:

• Medium consistency — comfortable working speed.

• High self-leveling ability — allows “ready-to-wear” modeling with less filing.

• Delicate shimmer matching the shade tone — soft glow without overpowering the color.

• Balanced strength and elasticity: resistant to cracks, chips, and lifting during wear.

• Minimal filing after polymerization.

• Comfortable curing process — reduced heat generation* (*when applied in the correct layer thickness).

• Compatible with bases/primers from most systems.

• Safe formula: TPO-free.

Technical specifications:

• Type: Modeling gel

• Effect: Delicate shimmer matching the shade tone

• Consistency: Medium

• Self-leveling: High

• Elasticity: Moderate

• Hardness: High

• Dispersion: Sticky layer remains after curing

• Curing time: LED – 60–90 sec. / UV – 120–180 sec.

• Volume: 30 ml

Application recommendations:

1. Prepare the nail plate (chemical and mechanical preparation).

2. Apply a thin layer of SCOTCH BASE / RUBBER BASE with rubbing motions.

3. Apply the first thin layer of BUILDER GEL as a base using rubbing motions, then add a larger bead for modeling (allow 1–3 seconds for self-leveling).

4. Cure: LED – 60–90 sec. / UV – 120–180 sec.

5. Remove the dispersion layer and perform minimal filing if needed.

6. Finish with color gel polish/top coat according to the chosen technique.

Warning:

Avoid contact with skin. Store in a tightly closed container at temperatures from +5°C to +25°C. Keep away from light and children. The material is sensitive to UV/LED rays — during work or content creation, do not leave the product open under lamp light or direct sunlight to prevent premature polymerization. Use only according to the instructions.